pbuilder (8)

---

NAME

pbuilder - personal package builder

SYNOPSIS

pbuilder --create [options]

pbuilder --update [options]

pbuilder --build [options] .dsc-file

pbuilder --execute [options] -- script [script options]

pbuilder --clean

pbuilder --login [options]

DESCRIPTION

Front end program to the pbuilder suite of programs, used for creating and maintaining chroot environment and building Debian package in the chroot environment.

COMMANDS

--create

Creates a base.tgz for the specified distribution.

--update

Updates the base.tgz for the specified distribution. Also, by specifying the --override-config option, it is possible to install a new apt-line using the given options and settings in the configuration file for the base.tgz.

For example, to switch the distribution of an existing base.tgz to sid, specify the --distribution sid --override-config options to update.

--build

Builds the package specified by .dsc-file in the chroot environment created using the base.tgz

--clean

Cleans up the directory specified by the configuration BUILDPLACE and APTCACHE specified in /etc/pbuilderrc

--login

Logs into the chroot, and cleaned up afterwards. Any changes you make will not be kept. Only use this for temporary and debugging purposes. Do not bind-mount filesystems directly inside the chroot. Use --bindmounts option to mount.

--execute

Execute a script or command inside the chroot, in a similar manner to --login

The file specified in the command-line argument will be copied into the chroot, and invoked.

The remaining arguments are passed on to the script.

--dumpconfig

Dumps configuration information, used for debugging.

--debuild

Builds a Debian package from the Debian source directory. The current directory should have the usual debian/ directory.

Same as pdebuild --use-pdebuild-internal

OPTIONS

The command is followed by options of the form --option name which will modify the semantics as explained below. They are applied from left-to-right, and when there are conflicting options, the rightmost options will have effect.

--basetgz [basetgz-location]

Specifies the location of base.tgz

This option will define the default distribution and apt-lines when used in pbuilder --update and pbuilder --create

--buildplace [location of build]

Specifies the location where building and base.tgz updating and creation takes place. This is a temporary work directory.

A subdirectory of that directory using the current PID of the process is used.

--buildresult [location to put build result]

Specifies the location the build result gets into after building. The deb files and other files that have resulted from build is copied there. Note that the default value is not the current directory, or .. but another place, /var/cache/pbuilder/result This is to avoid overwriting already existing deb files with the newly generated ones.

--mirror [mirror location]

Specifies the URL of Debian mirror to be specified in sources.list inside the chroot. This option is only valid when distribution is being specified, for --update and --build targets. The format is something like: http://http.us.debian.org/debian which should point to your favourite mirror.

This option can optionally be omitted, and left blank, in which case, this part is skipped.

Note that these URLs specified to pbuilder will be used from within the chroot, and specifying file:/somewhere/ will most probably fail.

--othermirror [deb http://xxx/xxx/ ./ | other deb lines... ]

The lines which is added to the sources.list, delimited with | Like deb http://local/mirror stable main|deb file:/usr/local/mirror ./

The deb lines here are the ones that will appear at the top of the sources.list inside the chroot. Be sure to follow the syntax rules of sources.list(5). These lines appear at the beginning of the constructed sources file, so this is the place to list your local mirror sites; apt will then use them in preference to the ones listed in --mirror.

--distribution [distribution]

Specifies the distribution used. The supported values are the ones debootstrap supports, plus experimental which is special cased in pbuilder. For instance you may use: sid or experimental.

--architecture [architecture]

Specifies the architecture used. The supported values are the ones debootstrap supports. i386 or amd64.

--components [components]

Specifies the default distribution components to use. eg. "main contrib non-free". Default is "main".

--override-config

Specify to use different apt set up inside the chroot than it was used for creating the base.tgz. Specify this when you want to do pbuilder --update with a different distribution target set up.

--distribution, --components, --mirror, --othermirror options are only valid when --override-config option is specified in --update target, or when pbuilder --create is being called.

--http-proxy [proxy]

Specifies the http proxy URL. Something like http://xxx.xxx.xxx.xxx:8080/ should do.

--aptcache [location of retrieved package files]

Specifies the location where the packages downloaded by apt should be cached. Use --aptcache if you want caching to be turned off.

--configfile [configuration file to load]

Additional configuration file to read after all other configuration files have been read.

--hookdir [location of user scripts]

Specifies the location where scripts for user intervention during the --create and --update process are stored. Currently scripts are executed at only one point, on exit from the chrooted environment, just before either a create or a build regenerated the base.tgz file. The script names must be in the form X<digit><digit><whatever-else-you-want> much like boot scripts. The scripts must be executable and may be either binaries or interpreted scripts. If it is a script in other than Bourne Shell or Perl, it is up to the user to ensure the interpreter was previously installed in the chrooted environment. Files ending in ~ or .bak are ignored.

Although it may not seem necessary, pbuilder --update does not invoke the hooks if --hookdir is empty, so if you want to avoid running hooks, run pbuilder with --hookdir

If there is a distribution hook, for example, if there was a file sid inside the hook directory, and the script was creating the chroot for sid distribution, pbuilder will call debootstrap with that as the 4th parameter in the chroot creation process. This allows for use of custom debootstrap hook script.

A<digit><digit><whatever-else-you-want> is for --build target. It is executed before build starts; after unpacking the build system, and unpacking the source, and satisfying the build-dependency.

B<digit><digit><whatever-else-you-want> is executed after build system finishes building, successfully, before copying back the build result.

C<digit><digit><whatever-else-you-want> is executed after build failure, before cleanup.

D<digit><digit><whatever-else-you-want> is executed before unpacking the source inside the chroot, after setting up the chroot environment. Create $TMP, and $TMPDIR if necessary.

This is called before build-dependency is satisfied. Also useful for calling apt-get update

E<digit><digit><whatever-else-you-want> is executed after pbuilder --update
 and pbuilder --create finishes apt-get work with the chroot, before umounting kernel file systems (/proc) and creating the tarball from the chroot.

F<digit><digit><whatever-else-you-want> is executed just before user logs in, or program starts executing, after chroot is created in --login or --execute target.

G<digit><digit><whatever-else-you-want> is executed just after debootstrap finishes, and configuration is loaded, and pbuilder starts mounting /proc and invoking apt-get install in --create target.

--debbuildopts [options]

List of options that are passed on to dpkg-buildpackage. Multiple flags are additive and appended ot the any value given in DEBBUILDOPTS as specified in pbuilderrc. To clear the list of options, pass the empty string, e.g. --debbuildopts "".

Multiple options are delimited with spaces, like --debbuildopts "-j100 -E"

--logfile [file to log]

Specifies the logfile to create. The messages generated during execution will be written to the specified file, and the standard output.

--binary-arch

Specify to build architecture specific targets instead of all targets. Setting --debbuildopts after this option will re-set some parts of the effect.

Use this option rather than using --debbuildopts -B

--bindmounts bind-mount-points

Bind-mount the specified directories to inside the chroot. bind-mount-points is a space-delimited list of directories to bind-mount which should be specified in a space-delimited manner, surrounded in double quotations, like: /srv /somedir /someotherdir

--debootstrapopts --variant=buildd --keyring /usr/share/keyrings/debian-archive-keyring.gpg

Add extra command-line options to debootstrap.

Specify multiple options through multiple instance of this option, for example:

--debootstrapopts --arch=arm --debootstrapopts --variant=buildd

--debootstrap debootstrap

Use specified debootstrap implementation as debootstrap. Known implementations are cdebootstrap and debootstrap and default is to use debootstrap.

--allow-untrusted

Allow untrusted (no key installed) and unsigned repositories. Warning: Enabling this option may allow remote attackers to compromise the system. Better use signed repositories and --keyring to add the key(s).

--keyring path/to/keyring

Additional keyrings to use for package verification with apt, not used for debootstrap (use --debootstrapopts ). Use this to add (local) signed repositories. By default the debian-archive-keyring package inside the chroot is used. Can be specified multiple times.

--save-after-login

--save-after-exec

Save the chroot image after exiting from the chroot instead of deleting changes. Effective for login and execute session.

--autocleanaptcache

Clean apt cache automatically, to run apt-get autoclean to only keep the packages which are required for the version of Debian. This is useful when you keep a aptcache directory for each distribution and want to keep the size of the aptcache down.

--help

Show a brief help message.

MORE SPECIFIC OPTIONS

Some options are more involved to pbuilder internal than others. The following options are available.

--removepackages [packages to remove]

Removes the packages on creating the base.tgz. Use this option to remove potentially dangerous or undesirable packages, like lilo which nobody will need to have inside a chroot.

Packages should be specified in a space-delimited manner, surrounded in double quotations, like lilo gcc mawk

--extrapackages [packages to add]

Adds packages specified as an addition to the default, which is build-essential by default. This is used in --build and --create (after successfully creating the initial chroot) and --update.

The packages should be specified as a space-delimited list.

--debemail [maintainer-name <email-address>]

Specifies that dpkg-buildpackage be called with -mmaintainer-name <email-address> instead of default value specified in the environment variable, or pbuilderrc

This option is almost obsolete, use --debbuildopts instead

--pkgname-logfile

Alternative option to --logfile option. Automatically creates a logfile that is named by the .dsc file name, only really applicable for --build target.

The file extension is specified by PKGNAME_LOGFILE_EXTENTION in pbuilderrc

--aptconfdir [APT configuration directory to use]

Uses the apt configuration file found in the specified directory as the chroot configuration. /etc/apt is one example, so that the same configuration can be used inside the chroot.

This option overrides other options, and may cause some inconsistency problems.

--timeout [timeout in sleep time]

Time out building after sleeping set time. Specify something like --timeout 10h in the command line. Default is no timeout.

--no-targz

Not using base.tgz for operation. The --buildplace will not be deleted and reconstructed from a .tar.gz file. Also, pbuilder will not add its process ID to the --buildplace as it usually would.

Useful when experimenting with chroots, or trying to create chroots outside control of pbuilder.

--compressprog

Program to use for compression and decompression of the base.tgz. The default is to use gzip, and any program that can be used for the --use-compress-program option of tar can be given.

If set to "pigz", compression and decompression is gzip compatible but will use all available CPUs.

--twice

Build the package twice in a row. Useful to ensure the package cleans up properly. The resulting packages are the ones from the second build.

--preserve-buildplace

Do not clean the --buildplace if it has the same contents as the .tar.gz file, and no modifications are done.

For preserving the build place for --create and --update targets, see --debug option.

As with --no-targz, suppresses appending pbuilder's process ID to the --buildplace.

This is useful if you want to attempt to build a large number of packages successively, but you expect that many of them cannot have their build dependencies satisfied.

It will clean up the build place on failure, or after a successful build.

--debug

Turn on Debug mode of pbuilder, to be verbose about errors, and try to avoid cleanup processing when error happens in --update and --create targets.

--inputfile filename

Add extra file to be copied to /tmp/buildd inside the build environment.

available in --build and --login and --execute targets.

FILES

/etc/pbuilderrc

The system-wide configuration file for pbuilder.

/usr/share/pbuilder/pbuilderrc

The default settings for pbuilder, used as fallback for all values that is not specified in /etc/pbuilderrc.

${HOME}/.pbuilderrc

The personal configuration file for pbuilder, which overrides settings set in other configuration files.

Note that ${HOME} is usually /root (if you are running pbuilder through sudo).

EXAMPLES

pbuilder --create

# pbuilder --create
Distribution is sid.
Building the build environment
 -> running debootstrap
/usr/sbin/debootstrap
I: Retrieving Release
I: Retrieving Packages
I: Validating Packages
        .
        .

pbuilder --update

# pbuilder --update
W: /home/dancer/.pbuilderrc does not exist
Building the build Environment
 -> extracting base tarball [/var/cache/pbuilder/base.tgz]
        .
        .

pbuilder --build

# pbuilder --build dsh_*.dsc
I: using fakeroot in build.
Current time: Sat Jan 20 12:03:34 JST 2007
pbuilder-time-stamp: 1169262214
Building the build Environment
 -> extracting base tarball [/home/dancer/DEBIAN/pbuilder/pbuilder/testsuite/tmp.FeeAX18779/testimage]
 -> creating local configuration
        .
        .

BUGS

This program is starting to have too many options already.

AUTHOR

Initial coding, and main maintenance is done by Junichi Uekawa <dancer@debian.org>. User hooks code added by Dale Amon <amon@vnl.com>

The homepage is available at http://pbuilder.alioth.debian.org

SEE ALSO

/usr/share/doc/pbuilder/pbuilder-doc.html, pdebuild(1), pbuilderrc(5)

---