doneq (5)


NAME

doneq/q* - HylaFAX outbound job description

DESCRIPTION

Files in the doneq directory specify transmission job requests. These files are created by hfaxd(8), when submitting a job on behalf of sendfax(1) or sendpage(1). Job description files also reside in the sendq directory; they are moved from there to the doneq directory by faxq(8) when a job completes.

Job description files are ASCII files with lines of the form


      tag: value

where a tag is one of the identifiers described below and a value is either a string or number. Values start at the first non-blank character after the ``:'' and continue to the end of the line. Lines that end with a backslash character ``\'' are continued to the next line. Numeric values are decimal integers, except for chophreshold which is expressed as a floating point value.

The following table lists the possible tags and the required type of the associated value.

Tag             Type       Description
chopthreshold   float      page chopping threshold (inches)
commid          string     communication identifier for last call
company         string     receiver's company
client          string     host that submitted the job
cover           string     continuation coverpage file
data            string     unprocessed document of indeterminate type
!data           string     processed document of indeterminate type
dataformat      string     data format used to transmit a facsimile
desiredbr       integer    desired transmit speed
desireddf       integer    desired page data format
desiredec       integer    desired use of Error Correction Mode (ECM)
desiredst       integer    desired minimum scanline time
desiredtl       integer    whether or not to use tagline parameter
doneop          string     operation to perform when job is reaped
external        string     external form of dialstring
fax             string     document ready for transmission
groupid         integer    HylaFAX job group identifier
jobid           integer    HylaFAX job identifier
jobtag          string     user-specified job identifier
jobtype         string     job type identification string
killtime        integer    time to give up trying to send job
location        string     receiver's location
mailaddr        string     email address of sender
maxdials        integer    max number of times to dial
maxtries        integer    max number of attempts to send job
minsp           integer    minimum required transmit speed
modem           string     outgoing modem to use
ndials          integer    number of consecutive failed attempts to place call
notify          string     email notification specification
npages          integer    number of pages transmitted
ntries          integer    number of attempts to send current page
number          string     dialstring to use in placing call
owner           string     user that owns the job
page            string     PIN in a page operation
pagechop        string     whitespace truncation handling
pagehandling    string     page analysis information
pagelength      integer    facsimile page length (millimeters)
pagewidth       integer    facsimile page width (millimeters)
passwd          string     info to send in HDLC PWD frame
pcl             string     unprocessed PCL document
!pcl            string     processed PCL document
poll            string     polling request
postscript      string     unprocessed POSTSCRIPT document
!postscript     string     processed POSTSCRIPT document
priority        integer    user-specified scheduling priority
receiver        string     receiver's identity
resolution      integer    vertical resolution of facsimile
retrytime       integer    time to use between job retries
returned        integer    indicates status return value for the job
schedpri        integer    current scheduling priority
sender          string     identity of sender
signalrate      string     signalling rate at which a facsimile was sent
state           integer    job scheduling state
status          string     job status
subaddr         string     info to send in HDLC SUB frame
tagline         string     tagline format string
tiff            string     unprocessed TIFF/F document
!tiff           string     processed TIFF/F document
totdials        integer    total number of phone calls
totpages        integer    total pages to transmit
tottries        integer    total number of attempts to send job
tts             integer    time to send job
useccover       integer    whether or not to use a continuation cover page
usexvres        integer    whether or not to use highest vertical resolution

PARAMETERS

Note that all files must be owned by the fax user. Pathnames for document files must be relative to the top of the HylaFAX spooling directory and not include ``..''.
chopthreshold
The minimum trailing whitespace (in inches) that must appear on a page for it to be considered for ``page chopping''. If this parameter is not specified then the value specified by the PageChopThreshold configuration parameter is used; see hylafax-config(5).
commid
The communication identifier for the last outbound call placed for this job. This string is of the form ``XXXXXXXX'' where XXXXXXXX is a decimal sequence number in the range 1-99999999.
client
The fully qualified hostname for the machine from which the job was submitted. If the hostname is unknown at the time the job is submitted, then the host address in Internet standard ``.'' (dot) notation is supplied instead.
company
The receiver's company name as specified with the -x option to sendfax(1). This value is used only when creating continuation cover pages.
cover
The pathname of a continuation cover page to send. The file must be TIFF/F (i.e. it must already be prepared for transmission). This document will be transmitted before any other documents listed in the file. See ContCoverPage and ContCoverCmd in hylafax-config(5).
data
The pathname of a document to send. Once a document has been processed, it is marked as !data so that subsequent retries do not reprocess the document.
dataformat
The format used to transmit facsimile data. This item is recorded by faxsend(8) so that notify(8) can return it in a notification message.
desiredbr
The desired signalling rate to use for page data transmissions: 0 for 2400 bps, 1 for 4800 bps, 2 for 7200 bps, 3 for 9600 bps, 4 for 12000 bps, and 5 for 14400 bps (default).
desireddf
The desired data format to use for page data transmissions: 0 for 1-D MH, 1 for 2-D MR, 3 for 2-D MR with uncompressed data, and 4 for 2-D MMR (default).
desiredec
Which type of Error Correction Mode (ECM) to use: 0 to disable, 1 for 64-byte ECM, or 2 for 256-byte ECM (default).
desiredst
The desired minimum scanline time to use for page data transmissions: 0 for 0 ms (default), 1 for 5 ms, 2 for 10ms/5ms, 3 for 10ms, 4 for 20ms/10ms, 5 for 20ms, 6 for 40ms/20ms, and 7 for 40ms. This value is used in selecting the negotiated session parameters.
desiredtl
Whether or not to use the format string specified by the tagline job parameter when imaging taglines on document pages. If this value is non-zero then per-job format string is used; otherwise the tagline format string specified in the server configuration file is used; see TagLineFormat in hylafax-config(5).
doneop
The treatment the job should be given when it is processed by the faxqclean(8) job cleaner program. The may be one of remove (to expunge the job description file and all associated documents that are not referenced by another job) or archive (to request that the job and associated documents be archived on the server machine). Consult faxqclean more details on other information that may be included in this string.
external
The external form of the dialstring. This string is used instead of the dialstring in any status and log messages. Clients can protect private information such as access codes that must be placed in dialstrings by supplying a ``cleansed'' version of the dialstring.
fax
The pathname of a TIFF/F document that is ready for transmission. If the pathname string has a leading ``xx:'', then ``xx'' is interpreted to be the index of the first directory in the file to transmit (directories are numbered starting at zero).
groupid
The job group identifier, an integer number in the range 1 to 32000 assigned to each group of jobs by the HylaFAX software. Each job in a group of jobs submitted at the same time is assigned the same value by the HylaFAX software.
jobid
The job identifier, a unique integer number in the range 1 to 32000 assigned to each job by the HylaFAX software.
jobtag
A user-specified string that is intended for identification purposes. If this string is defined, it is returned to the user in notification messages instead of the job identifier.
killtime
The time to kill this job, expressed in seconds since 00:00:00 GMT, January 1, 1970.
location
The receiver's location as specified with the -y option to sendfax(1). This value is used only when creating continuation cover pages.
mailaddr
The electronic mail address to which notification messages should be directed.
maxdials
The maximum number of times the server should dial the phone. If the job cannot be completed in this number of calls, it is terminated.
maxtries
The maximum number of times the server should attempt to send a job; where an attempt is defined to be a session that makes it past Phase A of the CCITT T.30 protocol (for facsimile), or similar. If the job cannot be completed in this number of tries, it is terminated.
minsp
The minimum signalling rate to use for transmitting page data: 0 for 2400 bps (default), 1 for 4800 bps, 2 for 7200 bps, 3 for 9600 bps, 4 for 12000 bps, and 5 for 14400 bps.
modem
The outgoing modem to use to send the job, or ``any'' if any available modem is acceptable.
owner
The identity of the user that owns the job. Typically the owner is the user that created the job, though clients with administrative privileges can change the ownership of jobs. The value is the string specified in the USER command passed to hfaxd(8) when a client logins in to the server.
notify
A specification of whether the sender wants notification: whenever the job is requeued after a failed attempt to transmit (``when requeued''), when the job is completed (``when done''), either of the above (``when done+requeued''), or not at all (``none'').
npages
The number of pages in the facsimile, including the cover page, that have been successfully transmitted.
ntries
The number of unsuccessful attempts that have been made to transmit the current page.
ndials
The number of consecutive unsuccessful attempts to establish carrier with the the remote device.
number
The dialstring to use to call the destination device.
page
a string with PIN and to use in processing a page transmit request.
pagechop
Whether or not to automatically truncate trailing whitespace on pages of outbound facsimile; see PageChop in hylafax-config(5). The possible values are: ``default'' to use the setting of the PageChop configuration parameter, ``none'' to disable page chopping, ``all'' to enable chopping of all pages, and ``last'' to enable chopping of the last page of each document.
pagehandling
A string that contains per-page information used during facsimile transmission. Most of the information is used in the negotiation of session capabilities with optional information used in the implementation of page chopping. The string has three characters, say xxc, for each page to be transmitted. The xx characters are a hex-encoded specification of the session capabilities required to transmit the page. The c character is one of ``M'', ``S'', and ``P''; where: ``M'' indicates there is another page to follow and that the page requires different T.30 session parameters be negotiated (an EOM code is to be transmitted). ``S'' indicates there is another page to follow, but the page uses the same session parameters (an MPS. code is to be transmitted). ``P'' indicates this is the last page to be transmitted (an EOP code is to be transmitted). In addition, if page chopping has been enabled and the page has enough trailing whitespace to be a candidate, then each three character string will be followed by a string of the form ``ZXXXX'', where ``XXXX'' is a 4 digit hex-encoded count of the number of bytes of data to send for a chopped page.
pagelength
The desired page length in millimeters.
pagewidth
The desired page width in millimeters.
pcl
The pathname of a PCL document to send. Once a PCL document has been processed by faxsend, it is marked as !pcl so that subsequent retries do not reprocess the document.
poll
The value is a Caller Identification String (CIS) to use in making a polling request. If no CIS is specified then faxsend will form one from the FAXNumber configuration parameter.
postscript
The pathname of a POSTSCRIPT® document to send. Once a POSTSCRIPT document has been processed by faxsend, it is marked as !postscript so that subsequent retries do not reprocess the document.
receiver
The receiver's name. This value is used only when creating continuation cover pages.
resolution
The desired vertical resolution in lines per inch. This value should be either 98 or 196.
retrytime
The time, in seconds, to delay between each attempt to transmit a job that fails because of a communication-oriented problem. Normally jobs are scheduled according to a collection of configuration parameters that are tuned for the specific reason of each failure; e.g. see JobReqProto in hylafax-config(5).
returned
Used internally to determine the last return value of the send command issued for this job.
sender
The ``full name'' of the sender of the facsimile.
signalrate
The signalling rate used to transmit facsimile data. This item is recorded by faxsend(8) so that notify(8) can return it in a notification message.
state
The job scheduling state. Recognized values are: 1 (suspended, not being scheduled), 2 (pending, waiting for the time to send), 3 (sleeping, waiting for a scheduled timeout), 4 (blocked, waiting for concurrent activity to the same destination to complete), 5 (ready, ready to be processed except for available resources), 6 (active, actively being processed by HylaFAX), 7 (done, processing completed with success). 8 (failed, processing completed with a failure).
status
Status information about the current state of the job. Typically this is the reason why the last attempt to send the facsimile failed.
subaddr
The SubAddress information to transmit when sending a facsimile. This string should be used by the receiver to route received facsimile documents.
tagline
The format string to use in imaging taglines on outgoing documents. Note that this parameter is only used if the desiredtl parameter is non-zero.
tiff
The pathname of a TIFF/F document to send. Once a TIFF document has been processed by faxsend, it is marked as !tiff so that subsequent retries do not reprocess the document.
totdials
The total number of times the server has placed a call to the receiving phone number.
totpages
The total number of pages to be transmitted.
tottries
The total number of attempts to transmit a job; see maxtries above.
tts
The time to send the job. If this value is non-zero, it is number of seconds since 00:00:00 GMT, January 1, 1970. Otherwise, a value of 0 is interpreted to mean process as soon as possible.
useccover
1 if the job should use a continuation cover page during retransmission, 0 otherwise.
usexvres
1 if the job should use the highest possible vertical resolution, 0 otherwise. See hylafax-server(5) for a description of continuation cover pages.

SEE ALSO

sendfax(1), faxq(8), faxqclean(8), faxsend(8), pagesend(8), hfaxd(8), hylafax-config(5)