cupsd.conf (5)

NAME
DESCRIPTION
DIRECTIVES
SEE ALSO
COPYRIGHT

NAME

cupsd.conf - server configuration file for cups

DESCRIPTION

The cupsd.conf file configures the CUPS scheduler, cupsd(8). It is normally located in the /etc/cups directory. Note: File, directory, and user configuration directives that used to be allowed in the cupsd.conf file are now stored in the cups-files.conf(5) instead in order to prevent certain types of privilege escalation attacks.

Each line in the file can be a configuration directive, a blank line, or a comment. Comment lines start with the # character. The configuration directives are intentionally similar to those used by the popular Apache web server software and are described below.

DIRECTIVES

The following directives are understood by cupsd(8). Consult the on-line help for detailed descriptions:

AccessLogLevel config
AccessLogLevel actions
AccessLogLevel all: Specifies the logging level for the AccessLog file.
Allow all
Allow none
Allow host.domain.com
Allow *.domain.com
Allow ip-address
Allow ip-address/netmask
Allow ip-address/mm
Allow @IF(name)
Allow @LOCAL: Allows access from the named hosts or addresses.
AuthType None
AuthType Basic
AuthType BasicDigest
AuthType Digest
AuthType Negotiate: Specifies the authentication type (None, Basic, BasicDigest, Digest, Negotiate)
AutoPurgeJobs Yes
AutoPurgeJobs No: Specifies whether to purge job history data automatically when it is no longer required for quotas.
BrowseLocalProtocols [All] [DNSSD]: Specifies the protocols to use for local printer sharing.
BrowseWebIF Yes
BrowseWebIF No: Specifies whether the CUPS web interface is advertised via DNS-SD.
Browsing Yes
Browsing No: Specifies whether or not shared printers should be advertised.
Classification banner: Specifies the security classification of the server.
ClassifyOverride Yes
ClassifyOverride No: Specifies whether to allow users to override the classification of individual print jobs.
DefaultAuthType Basic
DefaultAuthType BasicDigest
DefaultAuthType Digest
DefaultAuthType Negotiate: Specifies the default type of authentication to use.
DefaultEncryption Never
DefaultEncryption IfRequested
DefaultEncryption Required: Specifies the type of encryption to use for authenticated requests.
DefaultLanguage locale: Specifies the default language to use for text and web content.
DefaultPaperSize Auto
DefaultPaperSize None
DefaultPaperSize sizename: Specifies the default paper size for new print queues. "Auto" uses a locale- specific default, while "None" specifies there is no default paper size.
DefaultPolicy policy-name: Specifies the default access policy to use.
DefaultShared Yes
DefaultShared No: Specifies whether local printers are shared by default.
Deny all
Deny none
Deny host.domain.com
Deny *.domain.com
Deny ip-address
Deny ip-address/netmask
Deny ip-address/mm
Deny @IF(name)
Deny @LOCAL: Denies access to the named host or address.
DirtyCleanInterval seconds: Specifies the delay for updating of configuration and state files. A value of 0 causes the update to happen as soon as possible, typically within a few milliseconds.
Encryption IfRequested
Encryption Never
Encryption Required: Specifies the level of encryption that is required for a particular location.
FilterLimit limit: Specifies the maximum cost of filters that are run concurrently.
FilterNice nice-value: Specifies the scheduling priority ("nice" value) of filters that are run to print a job.
GSSServiceName name: Specifies the service name when using Kerberos authentication. The default service name is "http".
HostNameLookups On
HostNameLookups Off
HostNameLookups Double: Specifies whether or not to do reverse lookups on client addresses.
Include filename: Includes the named file.
JobKillDelay seconds: Specifies the number of seconds to wait before killing the filters and backend associated with a canceled or held job.
JobPrivateAccess all
JobPrivateAccess default
JobPrivateAccess {user|@group|@ACL|@OWNER|@SYSTEM}+: Specifies an access list for a job's private values. The "default" access list is "@OWNER @SYSTEM". "@ACL" maps to the printer's requesting-user-name-allowed or requesting-user-name-denied values.
JobPrivateValues all
JobPrivateValues default
JobPrivateValues none
JobPrivateValues attribute-name-1 [ ... attribute-name-N ]: Specifies the list of job values to make private. The "default" values are "job-name", "job-originating-host-name", and "job-originating-user-name".
JobRetryInterval seconds: Specifies the interval between retries of jobs in seconds.
JobRetryLimit count: Specifies the number of retries that are done for jobs.
KeepAlive Yes
KeepAlive No: Specifies whether to support HTTP keep-alive connections.
KeepAliveTimeout seconds: Specifies the amount of time that connections are kept alive.
<Limit operations> ... </Limit>: Specifies the IPP operations that are being limited inside a policy.
<Limit methods> ... </Limit>
<LimitExcept methods> ... </LimitExcept>: Specifies the HTTP methods that are being limited inside a location.
LimitRequestBody: Specifies the maximum size of any print job request.
Listen ip-address:port
Listen *:port
Listen /path/to/domain/socket: Listens to the specified address and port or domain socket path.
<Location /path> ... </Location>: Specifies access control for the named location.
LogDebugHistory #-messages: Specifies the number of debugging messages that are logged when an error occurs in a print job.
LogLevel alert
LogLevel crit
LogLevel debug2
LogLevel debug
LogLevel emerg
LogLevel error
LogLevel info
LogLevel none
LogLevel notice
LogLevel warn: Specifies the logging level for the ErrorLog file.
LogTimeFormat standard
LogTimeFormat usecs: Specifies the format of the date and time in the log files.
MaxClients number: Specifies the maximum number of simultaneous clients to support.
MaxClientsPerHost number: Specifies the maximum number of simultaneous clients to support from a single address.
MaxCopies number: Specifies the maximum number of copies that a user can print of each job.
MaxHoldTime seconds: Specifies the maximum time a job may remain in the "indefinite" hold state before it is canceled. Set to 0 to disable cancellation of held jobs.
MaxJobs number: Specifies the maximum number of simultaneous jobs to support.
MaxJobsPerPrinter number: Specifies the maximum number of simultaneous jobs per printer to support.
MaxJobsPerUser number: Specifies the maximum number of simultaneous jobs per user to support.
MaxJobTime seconds: Specifies the maximum time a job may take to print before it is canceled. The default is 10800 seconds (3 hours). Set to 0 to disable cancellation of "stuck" jobs.
MaxLogSize number-bytes: Specifies the maximum size of the log files before they are rotated (0 to disable rotation)
MaxRequestSize number-bytes: Specifies the maximum request/file size in bytes (0 for no limit)
MultipleOperationTimeout seconds: Specifies the maximum amount of time to allow between files in a multiple file print job.
Order allow,deny
Order deny,allow: Specifies the order of HTTP access control (allow,deny or deny,allow)
PageLogFormat format string: Specifies the format of page log lines.
PassEnv variable [... variable]: Passes the specified environment variable(s) to child processes.
<Policy name> ... </Policy>: Specifies access control for the named policy.
Port number: Specifies a port number to listen to for HTTP requests.
PreserveJobFiles Yes
PreserveJobFiles No: Specifies whether or not to preserve job files after they are printed.
PreserveJobHistory Yes
PreserveJobHistory No: Specifies whether or not to preserve the job history after they are printed.
PrintcapFormat bsd
PrintcapFormat plist
PrintcapFormat solaris: Specifies the format of the printcap file.
ReloadTimeout seconds: Specifies the amount of time to wait for job completion before restarting the scheduler.
Require group group-name-list
Require user user-name-list
Require valid-user: Specifies that user or group authentication is required.
RIPCache bytes: Specifies the maximum amount of memory to use when converting images and PostScript files to bitmaps for a printer.
Satisfy all
Satisfy any: Specifies whether all or any limits set for a Location must be satisfied to allow access.
ServerAdmin user@domain.com: Specifies the email address of the server administrator.
ServerAlias hostname [... hostname]
ServerAlias *: Specifies an alternate name that the server is known by. The special name "*" allows any name to be used.
ServerName hostname-or-ip-address: Specifies the fully-qualified hostname of the server.
ServerTokens Full
ServerTokens Major
ServerTokens Minimal
ServerTokens Minor
ServerTokens None
ServerTokens OS
ServerTokens ProductOnly: Specifies what information is included in the Server header of HTTP responses.
SetEnv variable value: Set the specified environment variable to be passed to child processes.
SSLListen: Listens on the specified address and port for encrypted connections.
SSLOptions None
SSLOptions [NoEmptyFragments] [AllowRC4] [Allow SSL3]: Sets SSL/TLS protocol options for encrypted connections. By default, CUPS only supports encryption using TLS v1.0 or higher using known secure cipher suites. The NoEmptyFragments option allows CUPS to work with Microsoft Windows with the FIPS conformance mode enabled. The AllowRC4 option enables the 128-bit RC4 cipher suites, which are required for some older clients that do not implement newer ones. The AllowSSL3 option enables SSL v3.0, which is required for some older clients that do not support TLS v1.0.
SSLPort: Listens on the specified port for encrypted connections.
StrictConformance Yes
StrictConformance No: Specifies whether the scheduler requires clients to strictly adhere to the IPP specifications. The default is No.
SubscriptionPrivateAccess all
SubscriptionPrivateAccess default
SubscriptionPrivateAccess {user|@group|@ACL|@OWNER|@SYSTEM}+: Specifies an access list for a subscription's private values. The "default" access list is "@OWNER @SYSTEM". "@ACL" maps to the printer's requesting-user-name-allowed or requesting-user-name-denied values.
SubscriptionPrivateValues all
SubscriptionPrivateValues default
SubscriptionPrivateValues none
SubscriptionPrivateValues attribute-name-1 [ ... attribute-name-N ]: Specifies the list of job values to make private. The "default" values are "notify-events", "notify-pull-method", "notify-recipient-uri", "notify-subscriber-user-name", and "notify-user-data".
Timeout seconds: Specifies the HTTP request timeout in seconds.
WebInterface yes
WebInterface no: Specifies whether the web interface is enabled.

cupsd.conf (5)

Contents

NAME

DESCRIPTION

DIRECTIVES

SEE ALSO

COPYRIGHT