NAME

SYNOPSIS

DESCRIPTION

None of these commands allow multiple options to be combined into one, and they do not allow the value for an option to be specified in a separate argument.

COMMANDS

-x filename.dsc [output-directory]

Extract a source package. One non-option argument must be supplied, the name of the Debian source control file (.dsc). An optional second non-option argument may be supplied to specify the directory to extract the source package to, this must not exist. If no output directory is specified, the source package is extracted into a directory named source-version under the current working directory.

dpkg-source will read the names of the other file(s) making up the source package from the control file; they are assumed to be in the same directory as the .dsc.

The files in the extracted package will have their permissions and ownerships set to those which would have been expected if the files and directories had simply been created - directories and executable files will be 0777 and plain files will be 0666, both modified by the extractors' umask; if the parent directory is setgid then the extracted directories will be too, and all the files and directories will inherit its group ownership.

If the source package uses a non-standard format (currently this means all formats except "1.0"), its name will be stored in debian/source/format so that the following builds of the source package use the same format by default.

-b directory [format-specific-parameters]

Build a source package. The first non-option argument is taken as the name of the directory containing the debianized source tree (i.e. with a debian sub-directory and maybe changes to the original files). Depending on the source package format used to build the package, additional parameters might be accepted.

dpkg-source will build the source package with the first format found in this ordered list: the format indicated with the --format command line option, the format indicated in debian/source/format, "1.0". The fallback to "1.0" is deprecated and will be removed at some point in the future, you should always document the desired source format in debian/source/format. See section SOURCE PACKAGE FORMATS for an extensive description of the various source package formats.

--print-format directory

Print the source format that would be used to build the source package if dpkg-source -b directory was called (in the same conditions and with the same parameters).

--before-build directory

Run the corresponding hook of the source package format. This hook is called before any build of the package (dpkg-buildpackage calls it very early even before debian/rules clean). This command is idempotent and can be called multiple times. Not all source formats implement something in this hook, and those that do usually prepare the source tree for the build for example by ensuring that the Debian patches are applied.

--after-build directory

Run the corresponding hook of the source package format. This hook is called after any build of the package (dpkg-buildpackage calls it last). This command is idempotent and can be called multiple times. Not all source formats implement something in this hook, and those that do usually use it to undo what --before-build has done.

--commit [directory] ...

Record changes in the source tree unpacked in directory. This command can take supplementary parameters depending on the source format. It will error out for formats where this operation doesn't mean anything.

-?, --help

Show the usage message and exit.

--version

Show the version and exit.

OPTIONS

Generic build options

-ccontrol-file

Specifies the main source control file to read information from. The default is debian/control. If given with relative pathname this is interpreted starting at the source tree's top level directory.

-lchangelog-file

Specifies the changelog file to read information from. The default is debian/changelog. If given with relative pathname this is interpreted starting at the source tree's top level directory.

-Fchangelog-format

Specifies the format of the changelog. See dpkg-parsechangelog(1) for information about alternative formats.

--format=value

Use the given format for building the source package. It does override any format given in debian/source/format.

-Vname=value

Set an output substitution variable. See deb-substvars(5) for a discussion of output substitution.

-Tsubstvars-file

Read substitution variables in substvars-file; the default is to not read any file. This option can be used multiple times to read substitution variables from multiple files.

-Dfield=value

Override or add an output control file field.

-Ufield

Remove an output control file field.

-Zcompression, --compression=compression

Specify the compression to use for created files (tarballs and diffs). Note that this option will not cause existing tarballs to be recompressed, it only affects new files. Supported values are: gzip, bzip2, lzma and xz. gzip is the default. xz is only supported since dpkg 1.15.5.

-zlevel, --compression-level=level

Compression level to use. As with -Z it only affects newly created files. Supported values are: 1 to 9, best, and fast. The default is 9 for gzip and bzip2, 6 for xz and lzma.

-i[regex], --diff-ignore[=regex]

You may specify a perl regular expression to match files you want filtered out of the list of files for the diff. (This list is generated by a find command.) (If the source package is being built as a version 3 source package using a VCS, this can be used to ignore uncommited changes on specific files. Using -i.* will ignore all of them.)

The -i option by itself enables this setting with a default regex (preserving any modification to the default regex done by a previous use of --extend-diff-ignore) that will filter out control files and directories of the most common revision control systems, backup and swap files and Libtool build output directories. There can only be one active regex, of multiple -i options only the last one will take effect.

This is very helpful in cutting out extraneous files that get included in the diff, e.g. if you maintain your source in a revision control system and want to use a checkout to build a source package without including the additional files and directories that it will usually contain (e.g. CVS/, .cvsignore, .svn/). The default regex is already very exhaustive, but if you need to replace it, please note that by default it can match any part of a path, so if you want to match the begin of a filename or only full filenames, you will need to provide the necessary anchors (e.g. '(^|/)', '($|/)') yourself.

--extend-diff-ignore=regex

The perl regular expression specified will extend the default value used by --diff-ignore and its current value (if set). It does this by concatenating "|regex" to the existing value. This option is convenient to use in debian/source/options to exclude some auto-generated files from the automatic patch generation.

-I[file-pattern], --tar-ignore[=file-pattern]

If this option is specified, the pattern will be passed to tar(1)'s --exclude option when it is called to generate a .orig.tar or .tar file. For example, -ICVS will make tar skip over CVS directories when generating a .tar.gz file. The option may be repeated multiple times to list multiple patterns to exclude.

-I by itself adds default --exclude options that will filter out control files and directories of the most common revision control systems, backup and swap files and Libtool build output directories.

Note: While they have similar purposes, -i and -I have very different syntax and semantics. -i can only be specified once and takes a perl compatible regular expression which is matched against the full relative path of each file. -I can specified multiple times and takes a filename pattern with shell wildcards. The pattern is applied to the full relative path but also to each part of the path individually. The exact semantic of tar's --exclude option is somewhat complicated, see https://www.gnu.org/software/tar/manual/tar.html#wildcards for a full documentation.

The default regex and patterns for both options can be seen in the output of the --help command.

Generic extract options

--no-copy

Do not copy original tarballs near the extracted source package.

--no-check

Do not check signatures and checksums before unpacking.

--require-valid-signature

Refuse to unpack the source package if it doesn't contain an OpenPGP signature that can be verified either with the user's trustedkeys.gpg keyring, one of the vendor-specific keyrings, or one of the official Debian keyrings (/usr/share/keyrings/debian-keyring.gpg and /usr/share/keyrings/debian-maintainers.gpg).

SOURCE PACKAGE FORMATS

Format: 1.0

Extracting

Extracting a native package is a simple extraction of the single tarball in the target directory. Extracting a non-native package is done by first unpacking the .orig.tar.gz and then applying the patch contained in the .diff.gz file. The timestamp of all patched files is reset to the extraction time of the source package (this avoids timestamp skews leading to problems when autogenerated files are patched). The diff can create new files (the whole debian directory is created that way) but can't remove files (empty files will be left over).

Building

Building a native package is just creating a single tarball with the source directory. Building a non-native package involves extracting the original tarball in a separate ".orig" directory and regenerating the .diff.gz by comparing the source package directory with the .orig directory.

Build options (with -b):

If a second non-option argument is supplied it should be the name of the original source directory or tarfile or the empty string if the package is a Debian-specific one and so has no Debianisation diffs. If no second argument is supplied then dpkg-source will look for the original source tarfile package_upstream-version.orig.tar.gz or the original source directory directory.orig depending on the -sX arguments.

-sa, -sp, -sk, -su and -sr will not overwrite existing tarfiles or directories. If this is desired then -sA, -sP, -sK, -sU and -sR should be used instead.

-sk

Specifies to expect the original source as a tarfile, by default package_upstream-version.orig.tar.extension. It will leave this original source in place as a tarfile, or copy it to the current directory if it isn't already there. The tarball will be unpacked into directory.orig for the generation of the diff.

-sp

Like -sk but will remove the directory again afterwards.

-su

Specifies that the original source is expected as a directory, by default package-upstream-version.orig and dpkg-source will create a new original source archive from it.

-sr

Like -su but will remove that directory after it has been used.

-ss

Specifies that the original source is available both as a directory and as a tarfile. dpkg-source will use the directory to create the diff, but the tarfile to create the .dsc. This option must be used with care - if the directory and tarfile do not match a bad source archive will be generated.

-sn

Specifies to not look for any original source, and to not generate a diff. The second argument, if supplied, must be the empty string. This is used for Debian-specific packages which do not have a separate upstream source and therefore have no debianisation diffs.

-sa or -sA

Specifies to look for the original source archive as a tarfile or as a directory - the second argument, if any, may be either, or the empty string (this is equivalent to using -sn). If a tarfile is found it will unpack it to create the diff and remove it afterwards (this is equivalent to -sp); if a directory is found it will pack it to create the original source and remove it afterwards (this is equivalent to -sr); if neither is found it will assume that the package has no debianisation diffs, only a straightforward source archive (this is equivalent to -sn). If both are found then dpkg-source will ignore the directory, overwriting it, if -sA was specified (this is equivalent to -sP) or raise an error if -sa was specified. -sA is the default.

--abort-on-upstream-changes

The process fails if the generated diff contains changes to files outside of the debian sub-directory. This option is not allowed in debian/source/options but can be used in debian/source/local-options.

Extract options (with -x):

In all cases any existing original source tree will be removed.

-sp

Used when extracting then the original source (if any) will be left as a tarfile. If it is not already located in the current directory or if an existing but different file is there it will be copied there. (This is the default).

-su

Unpacks the original source tree.

-sn

Ensures that the original source is neither copied to the current directory nor unpacked. Any original source tree that was in the current directory is still removed.

All the -sX options are mutually exclusive. If you specify more than one only the last one will be used.

--skip-debianization

Skips application of the debian diff on top of the upstream sources.

Format: 2.0

The behaviour of this format is the same as the "3.0 (quilt)" format except that it doesn't use an explicit list of patches. All files in debian/patches/ matching the perl regular expression [\w-]+ must be valid patches: they are applied at extraction time.

When building a new source package, any change to the upstream source is stored in a patch named zz_debian-diff-auto.

Format: 3.0 (native)

Format: 3.0 (quilt)

Extracting

The main original tarball is extracted first, then all additional original tarballs are extracted in subdirectories named after the component part of their filename (any pre-existing directory is replaced). The debian tarball is extracted on top of the source directory after prior removal of any pre-existing debian directory. Note that the debian tarball must contain a debian sub-directory but it can also contain binary files outside of that directory (see --include-binaries option).

All patches listed in debian/patches/debian.series or debian/patches/series are then applied. If the former file is used and the latter one doesn't exist (or is a symlink), then the latter is replaced with a symlink to the former. This is meant to simplify usage of quilt to manage the set of patches. Note however that while dpkg-source parses correctly series files with explicit options used for patch application (stored on each line after the patch filename and one or more spaces), it does ignore those options and always expect patches that can be applied with the -p1 option of patch. It will thus emit a warning when it encounters such options, and the build is likely to fail.

Contrary to quilt's default behaviour, patches are expected to apply without any fuzz. When that is not the case, you should refresh such patches with quilt, or dpkg-source will error out while trying to apply them.

Similarly to quilt's default behaviour, the patches can remove files too.

The file .pc/applied-patches is created if some patches have been applied during the extraction.

Building

All original tarballs found in the current directory are extracted in a temporary directory by following the same logic as for the unpack, the debian directory is copied over in the temporary directory, and all patches except the automatic patch (debian-changes-version or debian-changes, depending on --single-debian-patch) are applied. The temporary directory is compared to the source package directory. When the diff is non-empty, the build fails unless --single-debian-patch or --auto-commit has been used, in which case the diff is stored in the automatic patch. If the automatic patch is created/deleted, it's added/removed from the series file and from the quilt metadata.

Any change on a binary file is not representable in a diff and will thus lead to a failure unless the maintainer deliberately decided to include that modified binary file in the debian tarball (by listing it in debian/source/include-binaries). The build will also fail if it finds binary files in the debian sub-directory unless they have been whitelisted through debian/source/include-binaries.

The updated debian directory and the list of modified binaries is then used to generate the debian tarball.

The automatically generated diff doesn't include changes on VCS specific files as well as many temporary files (see default value associated to -i option in the --help output). In particular, the .pc directory used by quilt is ignored during generation of the automatic patch.

Note: dpkg-source --before-build (and -b) will ensure that all patches listed in the series file are applied so that a package build always has all patches applied. It does this by finding unapplied patches (they are listed in the series file but not in .pc/applied-patches), and if the first patch in that set can be applied without errors, it will apply them all. The option --no-preparation can be used to disable this behavior.

Recording changes

--commit [directory] [patch-name] [patch-file]

Generates a patch corresponding to the local changes that are not managed by the quilt patch system and integrates it in the patch system under the name patch-name. If the name is missing, it will be asked interactively. If patch-file is given, it is used as the patch corresponding to the local changes to integrate. Once integrated, an editor is launched so that you can edit the meta-information in the patch header.

Passing patch-file is mainly useful after a build failure that pre-generated this file, and on this ground the given file is removed after integration. Note also that the changes contained in the patch file must already be applied on the tree and that the files modified by the patch must not have supplementary unrecorded changes.

If the patch generation detects modified binary files, they will be automatically added to debian/source/include-binaries so that they end up in the debian tarball (exactly like dpkg-source --include-binaries -b would do).

Build options

--allow-version-of-quilt-db=version

Allow dpkg-source to build the source package if the version of the quilt metadata is the one specified, even if dpkg-source doesn't know about it. Effectively this says that the given version of the quilt metadata is compatible with the version 2 that dpkg-source currently supports. The version of the quilt metadata is stored in .pc/.version.

--include-removal

Do not ignore removed files and include them in the automatically generated patch.

--include-timestamp

Include timestamp in the automatically generated patch.

--include-binaries

Add all modified binaries in the debian tarball. Also add them to debian/source/include-binaries: they will be added by default in subsequent builds and this option is thus no more needed.

--no-preparation

Do not try to prepare the build tree by applying patches which are apparently unapplied.

--single-debian-patch

Use debian/patches/debian-changes instead of debian/patches/debian-changes-version for the name of the automatic patch generated during build. This option is particularly useful when the package is maintained in a VCS and a patch set can't reliably be generated. Instead the current diff with upstream should be stored in a single patch. The option would be put in debian/source/local-options and would be accompanied by a debian/source/local-patch-header file explaining how the Debian changes can be best reviewed, for example in the VCS that is used.

--create-empty-orig

Automatically create the main original tarball as empty if it's missing and if there are supplementary original tarballs. This option is meant to be used when the source package is just a bundle of multiple upstream software and where there's no "main" software.

--no-unapply-patches, --unapply-patches

By default, dpkg-source will automatically unapply the patches in the --after-build hook if it did apply them during --before-build. Those options allow you to forcefully disable or enable the patch unapplication process. Those options are only allowed in debian/source/local-options so that all generated source packages have the same behavior by default.

--abort-on-upstream-changes

The process fails if an automatic patch has been generated. This option can be used to ensure that all changes were properly recorded in separate quilt patches prior to the source package build. This option is not allowed in debian/source/options but can be used in debian/source/local-options.

--auto-commit

The process doesn't fail if an automatic patch has been generated, instead it's immediately recorded in the quilt series.

Extract options

--skip-debianization

Skips extraction of the debian tarball on top of the upstream sources.

--skip-patches

Do not apply patches at the end of the extraction.

Format: 3.0 (custom)

Build options

All non-option arguments are taken as files to integrate in the generated source package. They must exist and are preferably in the current directory. At least one file must be given.

--target-format=value

Required. Defines the real format of the generated source package. The generated .dsc file will contain this value in its Format field and not "3.0 (custom)".

Format: 3.0 (git)

A source package in this format consists of a single bundle of a git repository .git to hold the source of a package. There may also be a .gitshallow file listing revisions for a shallow git clone.

Extracting

The bundle is cloned as a git repository to the target directory. If there is a gitshallow file, it is installed as `.git/shallow` inside the cloned git repository.

Note that by default the new repository will have the same branch checked out that was checked out in the original source. (Typically "master", but it could be anything.) Any other branches will be available under `remotes/origin/`.

Building

Before going any further, some checks are done to ensure that we don't have any non-ignored uncommitted changes.

git-bundle(1) is used to generate a bundle of the git repository. By default, all branches and tags in the repository are included in the bundle.

Build options

--git-ref=ref

Allows specifying a git ref to include in the git bundle. Use disables the default behavior of including all branches and tags. May be specified multiple times. The ref can be the name of a branch or tag to include. It may also be any parameter that can be passed to git-rev-list(1). For example, to include only the master branch, use --git-ref=master. To include all tags and branches, except for the private branch, use --git-ref=--all --git-ref=^private

--git-depth=number

Creates a shallow clone with a history truncated to the specified number of revisions.

Format: 3.0 (bzr)

Extracting

The tarball is unpacked and then bzr is used to checkout the current branch.

Building

Before going any further, some checks are done to ensure that we don't have any non-ignored uncommitted changes.

Then the VCS specific part of the source directory is copied over to a temporary directory. Before this temporary directory is packed in a tarball, various cleanup are done to save space.

DIAGNOSTICS

no source format specified in debian/source/format

The rationale is that format "1.0" is no longer the recommended format, you should usually pick one of the newer formats ("3.0 (quilt)", "3.0 (native)") but dpkg-source will not do this automatically for you. If you want to continue using the old format, you should be explicit about it and put "1.0" in debian/source/format.

the diff modifies the following upstream files

cannot represent change to file